16+2F Gigabit Network Managed Industrial Ethernet Switch
Managed Industrial Ethernet Switch Overview
The LNK-GY216M is a full Gigabit Layer 2+ managed industrial Ethernet switch
featuring 16x Gigabit RJ45 ports + 2x SFP uplinks, all supporting wire-speed forwarding.
It offers advanced L2+ management, including IPv4 static routing, ACL/QoS policies, VLAN segmentation,
and robust security mechanisms. To ensure high network reliability, this product
supports STP/RSTP/MSTP (<50ms) and ERPS (<20ms) ring protocols, thereby ensuring
fast failover during link failures.
The industrial-grade durability of the product is evidenced by its 6KV surge-protected,
IP40-rated aluminium alloy casing, dual DC power inputs and fanless cooling, which ensures
a 35-year MTBF in harsh environments (extreme temperatures, EMI and vibrations). It is ideal
for smart transportation, power grids, mining, oil/gas, and green energy, and enables stable,
efficient networks via Web/CLI/SNMP/Telnet management.
Managed Industrial Ethernet Switch Features
- Dual optical ports for long-distance transmission, supporting cascade and expansion
in ring or chain networks for simplified networking.
- Full Gigabit high-speed transmission with stable, high-bandwidth performance;
supports per-port speed and flow control.
- with 10M/250m long-distance extension, solving Ethernet cable communication limitations
- Industrial-grade high-bandwidth switching chip with high backplane capacity
and large packet buffer to reduce network congestion.
- IEEE 802.3x full-duplex flow control for smooth high-definition,
large bitstream transmission without packet loss.
- Supports automatic MAC address learning/updating and Auto MDI/MDI-X on all ports
- Service ports with 6KV surge protection plus power short-circuit
and overload protection for enhanced reliability.
- Rugged aluminum alloy housing with strong heat dissipation, anti-interference shielding,
corrosion resistance, and durability.
- Dual DC redundant power inputs with wide voltage range (DC 12–57V) for industrial applications
- DIN rail mounting, IP40-rated protection, and wide operating temperature range (-40℃ to +75℃)
for stable operation in harsh environments.
- Fanless, low-power, silent design for easy installation and long-term reliability
Managed Industrial Ethernet Switch Technical Indexes
|
model
|
LNK-GY216M
|
|
Port characteristics
|
|
Fixed port
|
Downlink port
|
16 10/100/1000Base-T RJ45 network ports
|
|
Uplink port
|
2 100/1000M SFP optical slot
|
|
Network port characteristics
|
1-16 ports 10/100/1000M adaptive, full/half-duplex MDI/MDI-X adaptive.
|
|
Twisted pair transmission
|
10BASE-T:Cat3,4,5 UTP(≤250 meter)
100BASE-TX:Cat5 or later UTP(≤100 meter)
1000BASE-T:Cat5e or later UTP(≤100 meter)
|
|
Optical port characteristics
|
Gigabit SFP optical fiber interface, which is not equipped with optical module by default, needs to be purchased separately (single-mode/multimode, single-fiber/dual-fiber optical module, LC/SC is optional).
|
|
optical cable
|
Multimode: 850 nm 0 ~ 550 m, 50 μ m/125 μ m & 62.5 μ m/125 μ m.
Single mode: 1310 nm 0 ~ 40 km, 1550 nm 0 ~ 120 km. 9.5μm/125μm
|
|
Exchange chip parameters
|
|
Network management type
|
L2+ network management
|
|
network protocol
|
IEEE802.3 10BASE-T； IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x Flow Control
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af DTE Power via MDI
IEEE 802.3at DTE Power via MDI
|
|
Forwarding mode
|
Store and forward (full line speed)
|
|
CPU
|
500MHz
|
|
DRAM
|
1Gbits
|
|
FLASH
|
256Mbits
|
|
Backplane bandwidth
|
52Gbps (non-blocking)
|
|
Packet forwarding rate @64byte
|
26.78Mpps
|
|
media access control
|
8K
|
|
Packet forwarding cache
|
4Mbits
|
|
Giant frame
|
10Kbytes
|
|
Indicator light
|
Power indicator: PWR (green); System running light: SYS (green); Network indicator: Link/Act (green); Light port indicator: SFP (green).
|
|
One-key reset switch
|
1, press and hold for 6 seconds to release and restore the factory settings.
|
|
MTBF
|
500 thousand hours
|
|
POE and power supply characteristics
|
|
input voltage
|
DC12-57V
|
|
Power consumption of whole machine
|
Standby power consumption: < ＜15W；; Full load power consumption: < ＜20W
|
|
Supporting power supply
|
By default, it is not equipped with power supply, so it needs to be purchased separately. It is recommended to choose DC24V/1A.
|
|
Physical specification parameters
|
|
Heat dissipation mode
|
Fanless natural heat dissipation
|
|
Operating temperature/humidity
|
-40～+75°C； 5% ~ 90% RH has no condensation.
|
|
Storage temperature/humidity
|
-40～+85°C； 5% ~ 95% RH has no condensation.
|
|
Appearance size (L*W*H)
|
195*145*48mm
|
|
Net/gross weight
|
＜1.5kg / ＜1.8kg
|
|
Installation mode
|
Desk-top installation
|
|
Product certification and quality assurance
|
|
Lightning protection/protection level
|
Port lightning protection: 6 kV 8/20 US; Protection grade: IP40
|
|
Applicable industrial standards
|
IEC 61000-4-2 (ESD): 8 kV contact discharge, ±15kV air discharge.
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cord: 4 kV; Data line: ±2kV
IEC61000-4-5(Surge): power cord: cm 4kV/DM 2kV; Data line: ±4kV
IEC61000-4-6 (radio frequency conduction): 10V(150kHz~80MHz)
IEC61000-4-8 (power frequency magnetic field): 100A/m continuous; 1000A/m ,1s to 3s
IEC61000-4-9 (pulsed magnetic field): 1000A/m
IEC61000-4-10 (damped oscillation): 30A/m 1MHz
IEC61000-4-12/18 (Shock Wave): CM 2.5kV, DM 1kV
IEC61000-4-16 (common mode conduction): 30V continuous; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2 (General Industrial Standard)
|
|
mechanical properties
|
IEC60068-2-6 (Anti-vibration)
IEC60068-2-27 (Impact resistance)
IEC60068-2-32 (Free Fall)
|
|
Safety certification
|
CE,FCC,RoHS,CCC
|
|
Warranty period
|
5 years
|
|
Software management characteristics
|
|
port
|
Support IEEE802.3x flow control (full duplex) and half duplex back pressure flow control.
Support forced port mode and rate
Support broadcast storm and port storm suppression
Support port traffic speed limit, the granularity is at least 16Kbps and at most 1Gbps.
Support port real-time Flow Interval.
Support jumbo frame size control, which can support up to 16K packets.
Support optical port DDMI digital diagnosis function
|
|
IP routing
|
Support L2+ network management function,
Support IPV4 static route/default route with a maximum of 128 entries.
Support ARP protocol with a maximum of 1024 entries.
|
|
VLAN
|
Support port-based VLANs (4K), IEEE802.1q VLAN.
Support protocol-based VLAN
Support three types of port configurations: Access, Trunk and Hybrid.
|
|
trunk
|
Support static aggregation and dynamic aggregation (LACP)
Supports up to 8 aggregation groups, and each aggregation group supports up to 8 ports.
|
|
Ring network function
|
Support loop protection function
Support STP/RSTP/MSTP spanning tree protocol.
Support ERPS ring network (single ring, multi-ring, intersecting ring and tangent ring configuration), and the self-healing time of the ring network is less than 20 ms.
|
|
multicast
|
Support IGMP Snooping v1/v2/v3, and support up to 1024 multicast groups.
|
|
mirror image
|
Supports bidirectional traffic mirroring of basic ports.
|
|
QoS
|
With the priority of end-based, 802.1P and DSCP/ToS, each port supports 8 output queues.
Hold four priority scheduling modes: Equ, SP, WRR and SP+WRR.
Support priority Mark/Remark
Support flow-based speed limit, packet filtering and redirection.
|
|
ACL
|
Support L2 ~ L4 packet filtering function, can match the first 80 bytes of the message, and provide ACL based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN, etc.
Support ACL distribution based on port and VLAN.
|
|
Safety characteristics
|
Support user hierarchical management and password protection.
Support port-based IEEE802.1X authentication.
Support AAA&RADIUS and TACACS+ authentication.
Support MAC address learning number limit
Support MAC address black hole and address binding
Support SSH 2.0 to provide a secure encrypted channel for users to log in.
Support port isolation
Support ARP message speed limit function
Support IP source address protection
Support ARP intrusion detection function
Support anti-DoS attack
Support port broadcast message suppression
Support host data backup/restore mechanism
Quaternary binding function of IP+MAC+VLAN+ port
|
|
DHCP
|
Support DHCP Serve
Support DHCP Client
Support DHCP Snooping v1/v2/v3.
|
|
Management and maintenance
|
Support Web management, CLI command line (Console, Telnet), SNMP(V1/V2c/V3) and other diversified management and maintenance; support WEB management (support HTTP/HTTPS).
Support HTTP and TFTP file upload/download management.
Groups RMON 1, 2, 3 and 9 are supported.
Support to restore factory settings with one button.
Support NTP clock and local clock.
Support local logs and system logs (SYSLOG)
Support Ping detection
Support cable status check
Support CPU real-time utilization status view
Support link layer discovery protocol LLDP
Support NMS platform cluster unified management (LLDP+SNMP)
|
|
System requirements
|
Web browser: Mozilla Firefox 2.5 or higher, Google chrome V42 or higher.
Category 5 and above Ethernet cables;
TCP/IP network adapter and operating system (such as Microsoft Windows, Linux or Mac OS).
|
|
Model
|
Description
|
Suggested supporting power supply
|
|
LNK-GY216M
|
L2+ network management type 16 10/100/1000M network ports+2 Gigabit uplink SFP optical port slots, industrial Ethernet switches, support dual DC redundant power input (Phoenix terminal connection), and support rail installation.
|
DC24V/1A
|
|
Note: The power supply and SFP optical module are not matched by default. If you need to match them, please contact your dealer or business manager.
|
After-Sales and Warranty Policy
It is composed of online customer service and telephone customer service, providing product consultation,
remote technical support, maintenance and acceptance services.
Service Policy: Three-month replacement and three-year warranty.
Replacement: Within three months of purchasing a series of products, after testing the product failure
by technicians and man-made damage caused by non-natural disasters, the purchaser can directly
go to the purchasing point to replace the same type of products.Or a product of comparable performance.
If there is no trouble in product testing, the original sample will be returned.
Warranty: Man-made damage caused by non-natural disasters, our company's free warranty period is 1 year.
[The following circumstances do not fall within the scope of replacement and free maintenance]
1.Damage caused by operation and maintenance not in accordance with the instructions in the product manual.
2.Damage caused by human factors, such as inappropriate voltage input, water intake and breakage.
3.Damage to products caused by natural disasters, such as lightning, earthquakes, fires, etc.
3.Unauthorized alteration of the inherent settings or repair without the company's permission.
4.Products beyond the scope of free maintenance.
5.Damage caused by transportation, loading and unloading during repairs sent by customers.
6.The product bar code or model on the product warranty card does not conform to the product itself.
7.Failure or damage caused by other non-product problems such as design, technology, manufacturing and quality.
